| Customization: | Available |
|---|---|
| Breaking Capacity: | Low Voltage Circuit Breakers |
| Operation: | Electric Type |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our single channel electronic device protector is ideal solution for selective protection of system components in DC applications. Its width is only 6mm, greatly saving space in the cabinet. The single channel DC electronic circuit breaker has an adjustable output current range of 1-10A, which can be flexibly adjusted according to different load requirements. Electronic circuit breakers not only support dry node signals, but are also compatible with Modbus serial communication, allowing you to remotely read data and control it.
| 1 | Code | ZR: ZERO |
| 2 | Series Code | ECB: Electronic circuit breaker |
| 3 | Communication Method | N: Dry contact normally closed output |
| M: MODBUS 485 communication only | ||
| 4 | Number of Channels | 01: This type has only one channel |
| 5 | Rated Voltage | 24DC: 24V DC(12V, 48V is Optional) |
| 6 | Current Rating | 06: Rated current 6A, it can be selected 1, 2, 3, 4, 5, and 6A (If 10A is optional, set parameters 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) |
| Model Number | ZR-ECB-01-12VDC/10-000 | ZR-ECB-01-24VDC/10-000 |
| Installation Type | Standard DIN35mm rail mounting, 1 bit | |
| Type of Product | Device (overload) circuit breaker | |
| Protection Channel | 1 | |
| Insulation Protection Class | 3 | |
| Level of Pollution | 2 | |
| Width | 6mm | |
| Height | 90mm | |
| Depth | 72mm (including DIN7.5mm type guide rail) | |
| Operating Voltage Range | 9VDC---15VDC | 18VDC---30VDC |
| Rated Operating Voltage | 12VDC | 24VDC |
| Total Fixed Current | Max.10ADC (DC IN) | |
| Single Channel Rated Current | Less than 10A | |
| Main Power Input | For example, DC 12V+ | For example, DC 24V+ |
| Main Loop Ground | GND | |
| Single Control Output | DC (+) terminal device input, each channel is the same | |
| Single Road Common Ground | The DC (-) ground terminal is connected to the device in common ground | |
| Relay Dry Junction Output | Normally closed | |
| RS485 Communication Line | Slave, connected to the master controller (such as PLC) | |
| Jumper (Connector) Model | TJA6.2 | |
| Preset Current | 1-10A | |
| Rated Surge Voltage | 0.5 KV | |
| Type of Tripping | E (electronic type) | |
| Product Power Consumption | The static value is less than 0.5W | |
| Module Initialization Time | The power on time is less than 50ms | |
| Cooldown Time After Shutdown | Less than 30 S | |
| Current Measurement Error | Less than 5% | |
| MTBF (IEC61709, SN29500) | Product life 600Kh | |
){kind=link}